Interior Wall Putty

Aouf Tough Interior Wall Putty is a high-quality, acrylic-based ready-to-use wall putty specially formulated for interior use. It provides a smooth, even surface for water-based paints, improving finish and durability. This putty is the perfect base for achieving a flawless and refined paint finish on indoor walls and ceilings.

Uses:

Recommended wherever a smooth finish and high-performance surface preparation is needed. Suitable for cement plaster, concrete, chipboard, plywood, and similar interior substrates.

Surface Preparation:

Before application, ensure the surface is completely dry, and free from dust, grease, and loose particles. Use sandpaper or a scraper to clean the surface thoroughly before applying Aouf Interior Wall Putty.

Application Procedure:

Apply Aouf Ultra Seal Interior Primer before using the putty. After the putty is dry, apply another coat of primer before finishing with paint. For previously painted surfaces, remove all loose or flaky materials using abrasive paper or a stiff brush for better adhesion.

Drying Time:

• Touch dry in 2 hours
• Ready for topcoat application after 16 hours

Coverage:

Approximately 5–7 m² per kg per coat, depending on surface smoothness and porosity.

Packaging Sizes:

Available in 5 kg and 20 kg packs to meet different project needs.

Safety Precautions:

• Store in a cool, dry place, away from extreme heat or cold.
• Keep the container tightly closed and upright after use.
• Avoid contact with eyes; rinse immediately with water in case of exposure and seek medical advice if needed.
• Keep out of reach of children.